9102402 Rust-Oleum 9100 Activator, 1 gal, Gloss, Immersion, High Performance

ABOUT 9100 SYSTEM DTM EPOXY MASTIC

This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of Rust-Oleum High Performance 9100 System DTM Epoxy Mastic is equal to multiple coats of competitive epoxy. Multiple activator options for unique applications.

• Direct-to-metal (DTM) self priming formula—adheres to a variety of substrates
• Superior long-term resistance to solvents, chemicals, abrasion and impact
• Convenient 1:1 mixing ratio – no measuring required
• Two-year rust-proof guarantee—maximum corrosion protection
• Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities;<340 VOCs
• ACTIVATORS:
• Standard Activator
• For air and surface temps of 50-100°F (10-38°C)
• Immersion Activator
• For fresh or salt water immersion of steel or concrete where water temps do not exceed 125°F (52°C)
• Great for use in floor-coating applications
• Produces slightly lower gloss than standard activator
• not for use in potable water tanks
• Low-Temperature Activator
• For air and surface temps of 40-60°F (5-15°C)
• Fast-Cure Activator
• Faster cure to minimize downtime
• Recoat in 4 hours at 70°F (21°C) and 50% RH
• For air and surface temps of 50-100°F (10-38°C)
• Produces slightly lower gloss than standard activator

For Best Results

• This is a two-component system—order base color and activator separately.

Available Sizes

• Gallon
• Five Gallon