TWE11101202 Tweco® 11H Contact Tip, 0.035 Inch, 0.044 Inch Bore, 1 Inch L

Tweco® 11 Series Heavy Duty Contact Tip accommodates 0.035" wire and is perfect for use with 160 - 250 A Tweco® No.1 MIG gun as well as specific MIG gun series. Contact tip with excellent electrical properties is ideal for use in heavy-duty welding application up to 200 A. It features part number and wire diameter for easy identification. 1" Contact tip with M6 X 1.0-6g thread size has 0.044" nominal ID and 0.283" OD. Contact tip is made from extruded or gun-drilled 122 DHP copper alloy and machined from a copper alloy tubing to offer a consistent as well as smooth surface of inside diameter with +/-0.003" tolerance. It has threaded style that ensures proper contact with a gas diffuser when installed to the MIG gun. It comes in slip-on or thread-on nozzle styles with a choice of diameter bore sizes. Contact tip locks in place when twisted and offers better electrical conductivity with increased surface contact. Contact tip features thick-walled design that acts like a heat sink conducting heat away from the arc source. It can be twisted quarter turn clockwise when tip wear point is reached that reveals a new wear point for doubling the life of the tip. Contact tip is sold as 25 per pack.

KEY FEATURES

• Easy identification - each contact tip is marked showing part no and wire diameter
• Excellent electrical properties
• Inside diameter tolerance is held to +/-.003 in
• Threaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gun
• Machined from a copper alloy tubing providing a consistent and smooth inside diameter surface
• Twist it and it locks in place
• No threads to worry about
• Increased surface contact between contact tip/diffuser for better electrical conductivity
• Twist it quarter turn clockwise
• Use genuine Tweco® accessories, parts, and consumables to protect the quality of your welds and the life of your gun
• When tip wear point is reached after use, twist it half turn counter-clockwise to expose a new wear point
• This doubles the life of the tip
• Thick-walled diffuser design acts as a heat sink and conducts heat away from the arc source
• Increases electrical conductive surface area and thereby increases electrical conductivity

Applications

• Used in standard welding application up to 300 Amp